Bike Parking

Bike Parking at the shop

Anne Torney of Soloma E.T.C. Remins us of the following

 "An important constraint you might already be aware of : 
 the bike racks can’t block the area between the storefront and the chains 
  – this is a fire exit path." 

The architects for the building were Solomon, E.T.C., not David Baker. Solomon is part of WRT, where I work as a landscape architect. We did the landscape architecture for the courtyards.

The "bricks" are real individual unit pavers. Attaching something firmly to the ground would require removal of bricks, digging down through the gravel base that is below the bricks, and pouring a concrete footing. Using individual U-racks would require doing this for each point the rack hits the ground, i.e., two each. That's a lot of work. I'd recommend going with a large multi-bike rack, which may be secured at two or four points only.

The rack I'd recommend is a series of upside-down U's welded together along the bottoms. See this link:

http://www.creativepipe.com/gauntlet_gl_series_bike_racks.htm

(Note that some of them have a C-chanel across the bottom, but others have a flat bar.)